Atmen Technovention Private Limited
ActuatorDAQ brochure
Make in India Made in India
Dual actuator control and integrated DAQ

ActuatorDAQ

Compact industrial control and acquisition platform for independently driving two stepper motors while acquiring current, temperature, voltage, digital I/O, and analogue I/O data.

ActuatorDAQ product render
2Motor channels
48 VMotor supply
7 inchTouchscreen HMI
USBCSV logging

Integrated Control Platform

Motion Control

Position, velocity, jog, homing, forward/reverse direction, and sequence/profile control for two independent two-phase bipolar stepper motors.

Multi-Channel DAQ

Current consumption, PT100 temperature, voltage, digital status, and analogue values captured in one instrument.

Operator Interface

7-inch capacitive touchscreen for live display, trends, calibration, alarms, recipes, settings, and data export.

Proposed Technical Specification

System typeIntegrated dual-stepper motor controller with industrial I/O and multi-channel data acquisition.
Motor control2 independent channels, fixed 48 V DC supply, up to approximately 10 A peak per channel subject to final selection.
Current monitoring2 isolated motor-current channels, 0-20 A nominal range, 30 A short-duration headroom recommended.
Temperature2 PT100 RTD channels, 3-wire lead compensation, 0.1 deg C practical display resolution.
Voltage inputs4 protected channels, standard 0-10 V DC with optional 0-5 V, +/-5 V, or +/-10 V configuration.
Digital I/O3 configurable 24 V industrial channels for limits, home sensors, interlocks, triggers, or outputs.
Analogue I/O3 channels with 0-10 V and/or 4-20 mA configuration options.
ConnectivityUSB host/service, optional RS-485 Modbus RTU, optional CAN, and optional Ethernet.
CoolingTemperature-controlled forced-air cooling with fan monitoring and protective shutdown strategy.

Protection and Diagnostics

Motor Protection

Emergency stop, driver fault monitoring, overcurrent warning, and shutdown thresholds.

Thermal Protection

Fan control, overtemperature warning, fan-failure detection, and internal temperature monitoring.

Sensor Diagnostics

Open/short RTD checks, invalid voltage input detection, brownout reset, and timestamped fault history.