Atmen Technovention Private Limited
UniDAQ brochure
Make in India Made in India
32-channel universal high-speed DAQ

UniDAQ

Universal high-speed data acquisition system for dynamic and laboratory measurements across voltage, current, thermocouple, and strain gauge signal groups.

UniDAQ 32-channel data acquisition unit
32Total channels
1 MS/sAggregate engine
1 kHzPer-channel logging
EthernetPC interface

Channel Distribution

8 Voltage Inputs

Differential inputs with ranges designed to include +/-100 mV, +/-1 V, +/-5 V, and +/-10 V.

8 Current Inputs

Dedicated 0-20 mA and 4-20 mA measurement channels with zero/span scaling.

8 Thermocouple Inputs

J, K, T, E, N, R, S, and B types with local cold-junction compensation and linearization.

8 Strain Gauge Inputs

Quarter, half, and full bridge support with gauge factor, zero/balance, tare, and shunt calibration provision.

Customizable Connectors

Input connector type, pin grouping, terminal style, and channel labelling can be customized for the target sensor wiring.

Technical Specification

Total channels32 total: 8 voltage, 8 current, 8 thermocouple, and 8 strain gauge channels.
High-speed engine1 MS/s aggregate system acquisition capability.
Maximum loggingUp to 1 kHz per channel for configured 32-channel measurement operation.
Resolution18-bit minimum conversion resolution.
Memory128 MB minimum onboard acquisition and buffer memory.
CommunicationEthernet TCP/IP communication with PC software.
Input connectorsCustomizable connector layout for voltage, current, thermocouple, and strain gauge groups, including terminal style, pinout, and channel labelling.
Power input9-36 VDC system input with AC-to-DC adaptor included.
Temperature range-40 deg C to +85 deg C system design target.
Software supportWindows and Linux PC software with MATLAB, LabVIEW, OPC, and ActiveX integration provisions.
CalibrationFactory gain/offset calibration with stored calibration coefficients and factory test/calibration certificate.

Software and Deliverables

Monitoring

Numeric values, multi-channel trend graphs, channel status, and acquisition state monitoring.

Configuration

Channel type, range, sampling rate, filtering, scaling, excitation, gauge factor, and calibration.

Logging

Continuous or test-based timestamped recording with CSV and spreadsheet-compatible export.

Documentation

User manual, channel wiring/pin-out, software guide, technical datasheet, and calibration certificate.