8-channel industrial LVDT acquisition
Designed and manufactured in India
LVDTDAQ for Multi-Point Linear Displacement Measurement
LVDTDAQ is an Ethernet-connected displacement acquisition platform for simultaneous measurement from up to 8 industrial LVDT sensors. Each channel is designed for conditioned 0-10 VDC LVDT output sensors with independent zero, span, scaling, filtering, and engineering-unit configuration.
Designed and manufactured in India
Sensor interface
Conditioned LVDT measurement for industrial displacement data
The system accepts industrial LVDT sensors with integrated signal conditioning and 0-10 VDC output. It is intended for reliable multi-point linear displacement measurement through a common PC software and acquisition platform.
8 independent channels
Dedicated LVDT voltage-input channels for simultaneous displacement acquisition.
0-10 V sensor input
Designed for conditioned industrial LVDT outputs with protected analog input front ends.
Independent scaling
Each channel can be configured for zero, span, filtering, displacement units, and calibration.
Customizable connectors
Input connector style, pinout, shield termination, and channel labelling can be customized to match sensor wiring.
Technical specification
Industrial LVDT acquisition platform
LVDTDAQ combines protected analog inputs, sensor power distribution, onboard buffering, Ethernet PC communication, and displacement-focused software functions for synchronized LVDT measurement.
- Total channels
- 8 independent LVDT measurement channels.
- Supported sensor
- Industrial LVDT with integrated signal conditioning and 0-10 VDC output.
- Stroke range
- +/-50 mm per LVDT, 100 mm total displacement span per sensor.
- Input range
- 0-10 VDC nominal LVDT voltage-input channel range.
- Resolution
- 18-bit minimum conversion resolution.
- Sampling
- Selectable up to 1 kHz per LVDT channel.
- Sensor supply
- Central protected 14-24 VDC auxiliary supply distribution for up to 8 LVDTs.
- Memory
- 128 MB minimum onboard acquisition and buffer memory.
- System power
- 9-36 VDC input with AC mains adaptor included.
- Communication
- Ethernet communication with PC software; serial COM port support may be included by requirement.
- Input connectors
- 8 clearly identified LVDT input connectors, one per sensor, customizable for terminal style, pinout, shield termination, and installation needs.
- Operating range
- -40 deg C to +85 deg C DAQ electronics design target.
Software and calibration
Displacement-focused acquisition workflows
The PC software supports simultaneous display, graphing, logging, calibration, engineering-unit scaling, and export for all 8 LVDT channels.
Real-time display
Simultaneous displacement display from all 8 LVDT channels in mm or user-defined units.
Trend graphing
Real-time displacement-versus-time plotting for individual or multiple channels.
Zero and span
Independent channel zero/reference setting and two-point or multi-point scaling.
Logging and export
Continuous or test-based timestamped recording with CSV and spreadsheet-compatible export.
8-channel LVDT DAQ for linear position and displacement measurement
LVDTDAQ is designed for industrial displacement measurement, deflection testing, position monitoring, fixture validation, and laboratory motion studies where multiple LVDT sensors must be acquired, scaled, logged, and reviewed from one Ethernet-connected DAQ platform.
Next step